U.S. Department of Labor’s OSHA Requests Information on Table 1 of the Silica Standard for Construction

WASHINGTON, DC – The U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) is requesting information and comment on Table 1 of the agency’s Respirable Crystalline Silica Standard for Construction. OSHA seeks information on additional engineering and work practice control methods to effectively limit exposure to silica for the equipment and tasks currently listed on Table 1. The agency is also requesting information about other construction equipment and tasks that generate silica that it should consider adding to Table 1, along with information about their associated engineering and work practice control methods.

In addition, OSHA is seeking comments about whether to revise paragraph (a)(3) of the Respirable Crystalline Silica Standard for General Industry to broaden the circumstances under which general industry and maritime employers would be permitted to comply with Table 1 of the silica standard for construction.

Information submitted will allow OSHA to consider new developments and enhanced control methods for equipment that generates exposures to silica, and provide additional data on exposures to silica from equipment and tasks using a variety of control methods under different workplace conditions. Expanding Table 1 to include additional engineering and work practice control methods, equipment, and tasks could provide employers with more flexibility and reduce regulatory burdens while maintaining protections for employees.

If information submitted in response to this request indicates that revisions to the silica standards are needed, the agency will then publish the proposed revisions in the Federal Register for public comment.

Comments must be submitted by October 14, 2019. Comments and materials may be submitted electronically at http://www.regulations.gov, the Federal e-Rulemaking Portal, or by facsimile or mail. See the Federal Register notice for submission details.  

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to help ensure these conditions for American working men and women by setting and enforcing standards, and providing training, education, and assistance. For more information, visit www.osha.gov.

The mission of the Department of Labor is to foster, promote, and develop the welfare of the wage earners, job seekers, and retirees of the United States; improve working conditions; advance opportunities for profitable employment; and assure work-related benefits and rights.

3M Rope Grab Recall

3M Fall Protection has determined that the 3M™ PROTECTA® Cobra Mobile/Manual Rope Grab AC202D is incorrectly stamped for use with 1/2 to 3/4 inch diameter rope on the exterior body of the unit. This Cobra Rope Grab is certified for use ONLY with 5/8 inch diameter polyester or polypropylene rope. All marketing information and the Instructions for Use (IFU) for this rope grab correctly identify the size of rope to be used as 5/8 inch polyester/polypropylene rope.

June Meeting Follow Up

SAFER would like to thank both Peter Harrod, P.E. and Jeremy Souza from Code Red Consultants for their very informative briefing on NFPA 241 Implementation. They have kindly provided their briefing for SAFER members to review.

SAFER would also like to thank Capt. Andrew Went, Fire Prevention Division, City of Providence Fire Department for the information and support he provided on the City of Providence Fire Watch Permit (Hot Work) requirements.

We hope you have a safe summer and will see you in September.

The next meeting is Wednesday, June 5, 2019 8:00 AM-10:00 AM. It will be held in the Hall of Fame room, 2nd floor, New England Institute of Technology, 2490 Post Road, Warwick, RI 02886.

From Bob Kunz

Team SAFER,

We have an exciting program planned for the June meeting, as follows:
• NFPA 241 – Standard for Safeguarding Construction, Alteration, and Demolition Operations
Presented by: Peter Harrod, Principle for Code Red.
Note: Refer to City of Providence Guide to Permitting and State of RI Building Code – Section 101.4.6 refers to International Fire Code 2009 – Chapter 14 section 1401.1 refers to NFPA 241.

• City of Providence Fire Watch Permit (Hot Work)
Presented by: Capt. Andrew Went, Fire Prevention Division, City of Providence Fire Department.

The coffee and calories are sponsored by E.W. Audet and Sons, Inc.

Hope to see you at the June meeting.