OSHA added helpful information on Tornado Preparedness and Response. Full link here. First page from OSHA’s website:

Tornadoes can occur with little or no warning. Taking precautions in advance of the storms, such as developing an emergency plan, learning the warning signs, and monitoring tornado watches and warnings, can help you stay safe if a tornado occurs in your area.

OSHA and NOAA are working together on a public education effort aimed at improving the way people prepare for and respond to severe weather. This page is designed to help businesses and their workers prepare for tornadoes, and to provide information about hazards that workers may face in the aftermath of a tornado.

To prepare for a tornado, businesses should develop an emergency plan. The plan should include details on suitable places to take shelter, policies to ensure all personnel are accounted for, and procedures for addressing any hazardous materials that are on-site. It is also recommended that individuals develop action plans for their families.

The Checklists and Additional Resources pages offer a simple way to make sure that you are prepared for a tornado, including suggestions for communications equipment and personal preparedness kits.

After a tornado has occurred, as businesses take steps to recover from the storm, workers may face significant hazards including the potential for additional storms, downed electric lines, and sharp debris. Workers should also be aware of hazards from heat stress and from equipment used during response/recovery operations, such as portable generators. Workers will need to take special precautions in order to stay safe during response and recovery operations. The Response/Recovery page has more information on these hazards and protections workers should employ.

Employer Responsibilities

Each employer is responsible for the safety and health of its workers and for providing a safe and healthful workplace for its workers. Employers are required to protect workers from the anticipated hazards associated with the response and recovery operations that workers are likely to conduct. For additional information on Workers’ Rights, Employer Responsibilities, and other services OSHA offers, visit OSHA’s Compliance Assistance Page, Workers Page and Publications.

Full link here. From OSHA’s webpage:

FALLS ARE THE LEADING CAUSE OF DEATH IN CONSTRUCTION. In 2010, there were 264 fall fatalities (255 falls to lower level) out of 774 total fatalities in construction. These deaths are preventable.

Falls can be prevented and lives can be saved through three simple steps:

• Plan
• Provide
• Train

This website is part of OSHA’s nationwide outreach campaign to raise awareness among workers and employers about the hazards of falls from ladders, scaffolds and roofs. The educational resources page gives workers and employers information about falls and how to prevent them. There are also training tools for employers to use and posters to display at their worksites. Many of the new resources target vulnerable workers with limited English proficiency.

We invite you to join in this effort by helping to reach workers and employers in your community with the resources you find on this site. OSHA will continue to add information and tools to this page throughout the year.

OSHA has partnered with the National Institute for Occupational Safety and Health and National Occupational Research Agenda (NORA) – Construction Sector on this nationwide outreach campaign to raise awareness among workers and employers about common fall hazards in construction, and how falls from ladders, scaffolds and roofs can be prevented and lives can be saved. Here’s how:

PLAN ahead to get the job done safely
When working from heights, such as ladders, scaffolds, and roofs, employers must plan projects to ensure that the job is done safely. Begin by deciding how the job will be done, what tasks will be involved, and what safety equipment may be needed to complete each task.

When estimating the cost of a job, employers should include safety equipment, and plan to have all the necessary equipment and tools available at the construction site. For example, in a roofing job, think about all of the different fall hazards, such as holes or skylights and leading edges, then plan and select fall protection suitable to that work, such as personal fall arrest systems (PFAS).

PROVIDE the right equipment
Workers who are six feet or more above lower levels are at risk for serious injury or death if they should fall. To protect these workers, employers must provide fall protection and the right equipment for the job, including the right kinds of ladders, scaffolds, and safety gear.

Different ladders and scaffolds are appropriate for different jobs. Always provide workers with the kind they need to get the job done safely. For roof work, there are many ways to prevent falls. If workers use personal fall arrest systems (PFAS), provide a harness for each worker who needs to tie off to the anchor. Make sure the PFAS fits, and regularly inspect all fall protection equipment to ensure it’s still in good condition and safe to use.

TRAIN everyone to use the equipment safely
Falls can be prevented when workers understand proper set-up and safe use of equipment, so they need training on the specific equipment they will use to complete the job. Employers must train workers in hazard recognition and in the care and safe use ladders, scaffolds, fall protection systems, and other equipment they’ll be using on the job.

OSHA has provided numerous materials and resources that employers can use during toolbox talks to train workers on safe practices to avoid falls in construction. Falls from ladders, scaffolds and roofs can be prevented and lives can be saved through three simple steps: Plan, Provide and Train.